Learning the Steps on How to Jump Start Another Car

In order to jump-start any vehicle from another, you'll first need to get both vehicles as close as possible so the jumper cables can reach both batteries. Once this is done, put the cars in park, kill the engine, open the hoods.

Identify the negative and positive sides of the battery in each car, then do the same with the cables. Start by taking the red positive jumper cable and putting it on the dead battery first, then the other red cable to the good battery's positive side. Now we grab both black jumper cables, start with good battery negative terminal, then lastly to any exposed metal you can find near the dead battery. Start the car and wait before turning over the other. Once started, take cables off in a reverse sequence.

Today is the perfect day to come down to Wholesale Investments Inc. so we can load-test your car battery to see if it still has life in it.

Categories: Social